All Categories > End Mills Solid Carbide Ball Nose > View Items  

End Mills Solid Carbide Ball Nose

Check up to five results to perform an action.

End Mills- Good for all materials. 
  • These are a stocked end mill, ready to ship
  • Made from solid carbide
  • Special end mills can be made
    • To circle interpolate (multitask) where one or many diameters must be produced
    • With serrations for roughing with chamfer/radii and multi diameters
    • From carbide or HSS.
    • Coolant fed if needed
    • From a customer's tool print or part print

Material is on hand for rush service on specials.






    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
   
  Results 1 - 25 of 72 1 2 3 

Item #

# of Flutes

Flute Diameter

Length of Cut

Shank Diameter

Overall Length

Coating Type

CEMB2125 2 1/8 1/2 1/8 1-1/2 None
CEMB2125-TIN 2 1/8 1/2 1/8 1-1/2 TIN
CEMB4125 4 1/8 1/2 1/8 1-1/2 None
CEMB4125-TIN 4 1/8 1/2 1/8 1-1/2 TIN
CEMB2156 2 5/32 9/16 3/16 2 None
CEMB2156-TIN 2 5/32 9/16 3/16 2 TIN
CEMB4156 4 5/32 9/16 3/16 2 None
CEMB4156-TIN 4 5/32 9/16 3/16 2 TIN
CEMB2188 2 3/16 5/8 3/16 2 None
CEMB2188-TIN 2 3/16 5/8 3/16 2 TIN
CEMB4188 4 3/16 5/8 3/16 2 None
CEMB4188-TIN 4 3/16 5/8 3/16 2 TIN
CEMB2218 2 7/32 5/8 1/4 2-1/2 None
CEMB2218-TIN 2 7/32 5/8 1/4 2-1/2 TIN
CEMB4218 4 7/32 5/8 1/4 2-1/2 None
CEMB4218-TIN 4 7/32 5/8 1/4 2-1/2 TIN
CEMB2250 2 1/4 3/4 1/4 2-1/2 None
CEMB2250-TIN 2 1/4 3/4 1/4 2-1/2 TIN
CEMB4250 4 1/4 3/4 1/4 2-1/2 None
CEMB4250-TIN 4 1/4 3/4 1/4 2-1/2 TIN
CEMB2281 2 9/32 7/8 5/16 2-1/2 None
CEMB2281-TIN 2 9/32 7/8 5/16 2-1/2 TIN
CEMB4281 4 9/32 7/8 5/16 2-1/2 None
CEMB4281-TIN 4 9/32 7/8 5/16 2-1/2 TIN
CEMB2312 2 5/16 7/8 5/16 2 1/2 None
  Results 1 - 25 of 72 1 2 3